Readonly axisXReadonly axisYReadonly chartReadonly scaleScale of the series
Add point or array of points to the dataset.
// Example syntax
AreaRangeSeries.add({ position: 0, low: 10, high: 100 })
AreaRangeSeries.add([
{ position: 0, low: 100, high: 200 },
{ position: 10, low: 50, high: 220 },
{ position: 20, low: 75, high: 250 },
])
Data gaps
When using LineSeries, AreaSeries, AreaRangeSeries or other series types which connect data points together, the connections between specific data points can be removed by adding gap data points.
A gap data point is specified by using Number.NaN.
// Example, data gap syntax.
AreaRangeSeries.add([
{ position: 0, low: 10, high: 30 },
{ position: 1, low: 12, high: 32 },
{ position: 2, low: Number.NaN, high: Number.NaN },
{ position: 10, low: 15, high: 38 },
{ position: 11, low: 20, high: 35 },
{ position: 12, low: 18, high: 30 }
])
Series itself for fluent interface.
Add two individual Arrays, one for high values, and another for low values.
Object itself for fluent interface.
Array of High values.
Array of Low values. Length should be equal to length of array1.
Add callback function to be triggered when specified event is fired.
// Example syntax
object.addEventListener('click', (event) => {
console.log(event)
})
Some classes also report extra information about the interacted object with the second parameter:
// Most series share information about interacted data point
series.addEventListener('click', (event, info) => {
console.log(info)
})
Optional third parameter allows registering event handlers that will automatically remove themselves after first trigger:
// Example this listener will only fire once
object.addEventListener('click', (event) => {})
Each class has its own list of supported events.
Some events are from HTML standard (click, pointerdown, etc.),
while others are own events from LightningChart JS (dispose, resize, etc.)
To find what events are available, you can try following:
TypeScript enabled, just write addEventListener and see what possible event types the IDE suggests. These APIs are strongly typed, and even the callback event will be correctly typed.K type parameter extends.Callback function that is triggered when event is fired.
Optional options: LCJSAddEventListenerOptionsOptional extra configuration options.
Attach object to an legendBox entry
Series itself for fluent interface
Object which has to be attached
Flag that indicates whether the Attachable should be hidden or not, when its respective Entry is clicked.
By default, entries are assigned a smooth looking gradient based on the component color. If this flag is true, then this is skipped, and exact component solid fill is used instead.
Clear all previously pushed data points from the series.
// Example usage
LineSeries.clear()
Object itself for fluent interface.
Permanently destroy the component.
To fully allow Garbage-Collection to free the resources used by the component, make sure to remove any references to the component and its children in application code.
let chart = ...ChartXY()
let axisX = chart.getDefaultAxisX()
// Dispose Chart, and remove all references so that they can be garbage-collected.
chart.dispose()
chart = undefined
axisX = undefined
Object itself for fluent interface
Get whether series is taken into account with automatic scrolling and fitting of attached axes.
By default, this is true for all series.
true default, axes will take series into account in scrolling and fitting operations.
false, axes will ignore series boundaries.
Read whether series rendering should be clipped to the area enclosed by its owning axes or not. All series rendering is ALWAYS clipped so that it doesn't leak outside the owning charts series area. However, it is optional whether the series rendering should be able to leak outside the series owning axes viewport, which might be smaller than the charts viewport (for example, when using stacked axes).
By default, clipping is enabled (true).
True or false.
Beta
Get override behavior for when this series is formatted to be displayed by a cursor.
Override callback or undefined
Introduced in v6.0.0, the state and definition of this API is not finalized. It may change in future versions without regard to backwards compatibility if there is significant cause from user feedback.
Get theme effect enabled on component or disabled.
A theme can specify an Effect to add extra visual oomph to chart applications, like Glow effects around data or other components.
Whether this effect is drawn above a particular component can be configured using the setEffect method.
// Example, disable theme effect from a particular component.
Component.setEffect(false)
For the most part, theme effects are enabled by default on most components.
Theme effect is configured with effect property.
Boolean that describes whether drawing the theme effect is enabled around the component or not.
Get boolean flag that is true when a Pointer device is over the chart component.
In order for this method to work, the components pointer event tracking must be enabled (getPointerEvents)
Boolean
Remove event listener added using addEventListener.
The expected argument should be the exact same callback function that was supplied using addEventListener:
// Basic example syntax
const listener = () => {}
obj.addEventListener('click', listener)
obj.removeEventListener('click', listener)
// Basic boilerplate of custom interaction when user drags on an object
obj.addEventListener('pointerdown', (eventDown) => {
let prevCoord = eventDown
const handlePointerMove: LCJSInteractionEventListener<'pointermove'> = (eventMove) => {
const delta = { x: eventMove.clientX - prevCoord.clientX, y: eventMove.clientY - prevCoord.clientY }
prevCoord = eventMove
console.log(delta, eventMove.clientX, eventMove.clientY)
}
const handlePointerUp: LCJSInteractionEventListener<'pointerup'> = (eventUp) => {
window.removeEventListener('pointermove', handlePointerMove)
window.removeEventListener('pointerup', handlePointerUp)
}
window.addEventListener('pointermove', handlePointerMove)
window.addEventListener('pointerup', handlePointerUp)
})
Listener that was added using addEventListener.
Set component highlight animations enabled or not. For most components this is enabled by default.
// Example usage, disable highlight animations.
component.setAnimationHighlight(false)
Object itself
Animation enabled?
Set whether series is taken into account with automatic scrolling and fitting of attached axes.
By default, this is true for all series.
By setting this to false, any series can be removed from axis scrolling/fitting.
// Example syntax, remove series from automatic scrolling / fitting.
LineSeries.setAutoScrollingEnabled(false)
Object itself for fluent interface.
true default, axes will take series into account in scrolling and fitting operations.
false, axes will ignore series boundaries.
Configure whether series rendering should be clipped to the area enclosed by its owning axes or not. All series rendering is ALWAYS clipped so that it doesn't leak outside the owning charts series area. However, it is optional whether the series rendering should be able to leak outside the series owning axes viewport, which might be smaller than the charts viewport (for example, when using stacked axes).
By default, clipping is enabled (true).
// Example, disable clipping, allowing the series rendering to leak outside its own axes.
SeriesXY.setClipping(false)
Object itself
Clipping enabled or disabled.
Configure whether cursors should pick on this particular series or not.
// Example, prevent chart auto cursor from snapping to a series.
LineSeries.setCursorEnabled(false)
Related API:
Beta
Set override behavior for when this series is formatted to be displayed by a cursor. This can be used to alter and expand on cursor formatting done for a specific series, either by the library's default cursor formatters or even the users own cursor formatters defined on chart level.
// Example syntax, add extra row to display a custom data property
series.setCursorFormattingOverride((hit, before) => {
if (!isHitSampleXY(hit)) return before
const customPropertyValue = data[hit.iSample].customProperty
return [...before, ['ASD', '', customPropertyValue.toFixed(3)]]
})
To use this with users own cursor formatters, you can use useCursorFormatterSeriesOverride:
// Example syntax, define custom cursor formatting with support for series overrides
chart.setCursorFormatting((_, __, hits) => {
return [
[hits[0].axisX.formatValue(hits[0].x)],
...hits.map((hit) => useCursorFormatterSeriesOverride(hit, [['Y:', '', hit.axisY.formatValue(hit.y)]])).flat(),
]
})
Object itself.
Introduced in v6.0.0, the state and definition of this API is not finalized. It may change in future versions without regard to backwards compatibility if there is significant cause from user feedback.
Override callback or undefined
Disable automatic data cleaning.
// Example syntax, disable data cleaning.
series.setDataCleaning(undefined)
Object itself for fluent interface.
Data cleaning configuration.
Enable automatic data cleaning by minDataPointCount configuration.
Specifying minDataPointCount enables lazy cleaning of data that is outside view as long as the remaining data amount doesn't go below the configured threshold.
// Example syntax for specifying minDataPointCount
series.setDataCleaning({ minDataPointCount: 10000 })
Usage of minDataPointCount is recommended in most common applications that require automatic data cleaning.
The actual value is often not very particular, just setting it above 0 to enable it is usually enough (lazy data cleaning of out of view data).
// Example, enable lazy data cleaning of out of view data.
series.setDataCleaning({ minDataPointCount: 1 })
Object itself for fluent interface.
Data cleaning configuration.
Configure draw order of the series.
The drawing order of series inside same chart can be configured by configuring their seriesDrawOrderIndex.
This is a simple number that indicates which series is drawn first, and which last.
The values can be any JS number, even a decimal. Higher number results in series being drawn closer to the top.
By default, each series is assigned a running counter starting from 0 and increasing by 1 for each series.
// Example, create 2 series and configure them to be drawn in reverse order.
const series1 = ChartXY.addLineSeries()
.setDrawOrder({ seriesDrawOrderIndex: 1 })
const series2 = ChartXY.addLineSeries()
.setDrawOrder({ seriesDrawOrderIndex: 0 })
// Example, ensure a series is drawn above other series.
SeriesXY.setDrawOrder({ seriesDrawOrderIndex: 1000 })
Object itself.
Object with seriesDrawOrderIndex property.
Set theme effect enabled on component or disabled.
A theme can specify an Effect to add extra visual oomph to chart applications, like Glow effects around data or other components.
Whether this effect is drawn above a particular component can be configured using the setEffect method.
// Example, disable theme effect from a particular component.
Component.setEffect(false)
For the most part, theme effects are enabled by default on most components.
Theme effect is configured with effect property.
Object itself.
Theme effect enabled
Set fill style of high area of the Series.
Example Usage:
// Specified FillStyle
AreaRangeSeries.setHighFillStyle(new SolidFill({ color: ColorHEX('#F00') }))
// Changed transparency
AreaRangeSeries.setHighFillStyle((solidFill) => solidFill.setA(80))
// Hidden
AreaRangeSeries.setHighFillStyle(emptyFill)
Supports following styles:
Series itself for fluent interface.
Either a FillStyle object or a function, which will be used to create a new FillStyle based on current value.
Set style of the Series high stroke.
Example usage:
// Specified LineStyle
AreaRangeSeries.setHighStrokeStyle(new SolidLine({ thickness: 2, fillStyle: new SolidFill({ color: ColorHEX('#F00') }) }))
// Changed thickness
AreaRangeSeries.setHighStrokeStyle((solidLine) => solidLine.setThickness(5))
// Hidden (emptyLine is not supported)
AreaRangeSeries.setHighStrokeStyle(transparentLine)
Series itself for fluent interface.
Either a LineStyle object or a function, which will be used to create a new LineStyle based on current value.
Set state of component highlighting.
// Example usage
component.setHighlight(true)
component.setHighlight(0.5)
If highlight animations are enabled (which is true by default), the transition will be animated. As long as the component is highlighted, the active highlight intensity will be animated continuously between 0 and the configured value. Highlight animations can be disabled with setAnimationHighlight
Object itself
Boolean or number between 0 and 1, where 1 is fully highlighted.
Set highlight on mouse hover enabled or disabled.
Mouse interactions have to be enabled on the component for this to function as expected. See setPointerEvents for more information.
Object itself for fluent interface.
True if highlighting on mouse hover, false if no highlight on mouse hover
Beta
Set icon of the chart component. This is displayed in legends and by default cursor formatters.
const image = new Image()
image.src = 'image.png'
const icon = chart.engine.addCustomIcon(image)
ChartComponent.setIcon(icon)
Object itself.
Released as beta feature in v5.2.0 feature may still change according to user feedback and experiences.
Icon
Set fill style of low area of the Series.
Example Usage:
// Specified FillStyle
AreaRangeSeries.setLowFillStyle(new SolidFill({ color: ColorHEX('#F00') }))
// Changed transparency
AreaRangeSeries.setLowFillStyle((solidFill) => solidFill.setA(80))
// Hidden
AreaRangeSeries.setLowFillStyle(emptyFill)
Supports following styles:
Series itself for fluent interface.
Either a FillStyle object or a function, which will be used to create a new FillStyle based on current value.
Set style of the Series low stroke.
Example usage:
// Specified LineStyle
AreaRangeSeries.setLowStrokeStyle(new SolidLine({ thickness: 2, fillStyle: new SolidFill({ color: ColorHEX('#F00') }) }))
// Changed thickness
AreaRangeSeries.setLowStrokeStyle((solidLine) => solidLine.setThickness(5))
// Hidden (emptyLine is not supported)
AreaRangeSeries.setLowStrokeStyle(transparentLine)
Series itself for fluent interface.
Either a LineStyle object or a function, which will be used to create a new LineStyle based on current value.
Sets the name of the Component updating attached LegendBox entries
Object itself
Name of the Component
Set whether element can be target of pointer events or not.
Disabling pointer events means that the objects below this component can be interacted through it.
Object itself for fluent interface
Specifies state of mouse interactions
Set element visibility.
Object itself.
true when element should be visible and false when element should be hidden.
Method for solving the nearest data point to a given coordinate on screen.
// Example syntax
chart.onSeriesBackgroundMouseClick((_, event) => {
const nearest = series.solveNearest(event, 'show-nearest')
console.log(nearest)
})
SolveResult object or undefined.
Reference coordinate on web page as client coordinates. This can for example be directly an Event object.
Optional control for solve nearest behavior
Match legend entry style to reflect components own style.
By default, entries are assigned a smooth looking gradient based on the component color. If this flag is true, then this is skipped, and exact component solid fill is used instead.
Implementation of SeriesXY for visualizing a collection of progressive AreaPoints (which consist of one X-value, and two Y-values) by filling the area between the points two Y-values.
Composed of the areas fill and border, both of which have two possible styles:
AreaRangeSeries are created with addAreaRangeSeries.